2 x 2 Inches Red Heavy Wall Heat Shrink, Adhesive Lined, 3 to 1 Shrink Ratio

Product Description

2" Heavy Wall  Heat Shrink
Adhesive Lined
RED
Crosslinked Polyolefin Heat Shrink
Cut piece 2" Length

• Impact, abrasion, corrosion, and chemical resistant; suitable for submersion and direct burial

Features:

• Seals out water and dirt
• High 3 to 1 shrink ratio
• Meets UL 486D, CSA C22.2 198.2, ANSI C119-1, Western Underground Guide 2.4, 2.5, ICEA and NEMA insulation thickness requirements, DNV Type approval
• Continuous operating temperature: -55°C to 110°C
• Shrink temperature: 120°C
• 600V, 90°C continuous use

Applications:

• Electrical/Utility/Industrial
• St rain relief and mechanical protection
• Insulation of primary low voltage cables

-55°C to 110°C

Sizes

Select a size which will shrink snugly over the component to be covered.  Match your component diameter with the 
Recovered Inside Diameter (d) for the best fit.  Restricted recovery will result in lower wall thickness.

HSREDHD-2
D: 2 in. (50.8mm)
d: 0.63 in. (16mm)
w: 0.16 in. (4.1mm)